Aalborg TIO Totalizer I/O Flow Monitor/Controller Manuel d'utilisateur télécharger pdf (Page 25)

Once “Change PP Password” menu is selected, the following screen will appear:

In order to protect device configuration parameters when changing the PP pass-

word, the old PP password must be entered.

Once old and new passwords are entered the firmware will prompt with a confir-

mation message (see Figure 5.9) that the new password has been saved.

5.3.2 Submenu “Device Information”

This submenu contains information about the device’s main configuration param-

eters. These items are informational only, not password-protected, and can’t be

changed (read only).

Figure 5.8

Figure 5.9

NOTE: By default the device is shipped from the factory with

Program Protection (PP) password set to Zero (PP Disabled).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 97 98

Pas de commentaire

Aalborg TIO Totalizer I/O Flow Monitor/Controller Manuel d'utilisateur Page 25